506 found, showing page 13 of 34
1/4"-20 x 3/4" Truss Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank, for use with a nut or driven into a tapped hole. Use to fasten various components together in machines, tools, etc. The length of a machine screw is measured from under the head to the point of the screw. The truss head has a low rounded top surface with a flat bearing surface, greater in area than a round head fastener of the same nominal size. They are weaker than a pan or round fastener, but preferred in applications where minimal clearance exists above the head. The profile provides a trim, finished appearance.
- Diameter: 1/4"-20
- Length: 3/4"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
1/4"-20 x 1" Truss Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank, for use with a nut or driven into a tapped hole. Use to fasten various components together in machines, tools, etc. The length of a machine screw is measured from under the head to the point of the screw. The truss head has a low rounded top surface with a flat bearing surface, greater in area than a round head fastener of the same nominal size. They are weaker than a pan or round fastener, but preferred in applications where minimal clearance exists above the head. The profile provides a trim, finished appearance.
- Diameter: 1/4"-20
- Length: 1"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
1/4"-20 x 1-1/2" Truss Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank, for use with a nut or driven into a tapped hole. Use to fasten various components together in machines, tools, etc. The length of a machine screw is measured from under the head to the point of the screw. The truss head has a low rounded top surface with a flat bearing surface, greater in area than a round head fastener of the same nominal size. They are weaker than a pan or round fastener, but preferred in applications where minimal clearance exists above the head. The profile provides a trim, finished appearance.
- Diameter: 1/4"-20
- Length: 1-1/2"
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
#6-32 x 3/4" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #6-32
- Length: 3/4"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#8-32 x 1/4" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #8-32
- Length: 1/4"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#8-32 x 3/4" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #8-32
- Length: 3/4"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#10-24 x 1/2" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #10-24
- Length: 1/2"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#10-24 x 3/4" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #10-24
- Length: 3/4"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#10-24 x 1" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #10-24
- Length: 1"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
1/4"-20 x 3/4" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: 1/4"-20
- Length: 3/4"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
1/4"-20 x 1" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: 1/4"-20
- Length: 1"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
1/4"-20 x 1-1/2" Aluminum Round Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: 1/4"-20
- Length: 1-1/2"
- Round Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#6-32 x 1/2" Aluminum Oval Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #6-32
- Length: 1/2"
- Oval Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#8-32 x 3/4" Aluminum Oval Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #8-32
- Length: 3/4"
- Oval Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
#10-24 x 1" Aluminum Oval Head Machine Screw
Machine screws and nuts are used in conjunction with one another in order to fasten metal parts together securely. To ensure proper fit and quality of life, make sure to use machine screws with nuts of similar thread size and finish.
- Diameter: #10-24
- Length: 1"
- Oval Head
- Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together
- Use machine screws with nuts of a similar finish and threading to ensure proper fit
- Fasten with a screwdriver to reduce the risk of over-tightening to protect the screw and fastened material
- Constructed from high-strength aluminum
View Details
Call for Price
